Temperature rating of reflective insulation?

Discussion in 'Insulation and Radiant Barriers' started by guyod, Oct 24, 2013.

  1. Oct 24, 2013 #1

    guyod

    guyod

    guyod

    Senior Member

    Joined:
    Jan 12, 2008
    Messages:
    423
    Likes Received:
    21
    Does anyone know what the max temperature of radiant reflective insulation is? It just says Class 1 fire rating.
    I am making an outdoor wood furnace. I am using roxul insulation in a small metal shed to house it. That has a burn rate of 2,500F. I have a roll of the reflective installation and was thinking of using it in between stove and roxul on face of metal studs. It will be within inches of the stove. Trying to make this as safe and efficient as possible.

    cb2a78f9-f9ab-47e0-acc9-3f9ad43fd845_1000.jpg
     
  2. Oct 24, 2013 #2

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,897
    Likes Received:
    3,118
    Having anything that close to the furnace might be questionable. I think mostly the fire rating will just give you the time it takes to burn thru. I think layers of sheet metal with spaces between would be better. Each space would be able to draft cool air from the floor so each space going out would be cooler. The real question is how hot it is just inches from the unit.
     
  3. Oct 25, 2013 #3

    insulation_stop

    insulation_stop

    insulation_stop

    Foil Insulation Pro

    Joined:
    Oct 25, 2013
    Messages:
    1
    Likes Received:
    1
    Guyod:

    It's 180 degrees F for the reflective bubble insulation you show in the picture. Here is a shot of ours as well. The product is not designed or intended for a direct wrap around furnaces, chimneys, etc.

    It can however be used around the furnace to reflect or radiate heat away from the insulation. The best way to see how close you can put the material for your specific application is to test some non-reflective material. Position the material where you want the foil insulation to go and allow the furnace to heat up and take heat measurement readings. The darker the material the better as it will absorb more heat.

    The Class 1 / Classes A fire rating is for use with interior surfaces, insulation, drywall, and other materials used in building construction.

    If you want a full breakdown of the testing and certifications for InfraStop bubble foil insulation please let me know and I can email it to you.

    InfraStop Foil Double Bubble 48-50.jpg
     
    Last edited: Oct 25, 2013
    nealtw likes this.

Share This Page