Hello friends. I'm becoming a regular DIY'er and really doing many smaller and handyman type projects on my own. I'm now spending more $$$ at the local Home Depot than at the grocery store so I guess that qualifies me as a an official DIY'er! LOL If I am capable and I can physically take on the task I'm willing to try. I simply need the how-to and a little encouragement. I'm a woman with a lot of ingenuity and ambition and home which needs much attention. I have an old concrete driveway that was likely poured in the 1950s. This was my grandmother's home. I'd like to add a pergola-styled 15" fence from the garage to the house with 6x6 posts. I will likely add onto this at a future date and extend the pergola out over both sides to build a pergola covered area. Right now I simply need a fence and gate in this immediate area. I'm having difficulty determining how to set or attach these posts to the concrete. What are the recommendations or suggestions? Shall I cut concrete, use Simpson post brackets? I'm on a modest budget and have several other posts I wish to attach to concrete in the future around the pool area so if it makes sense to hire someone to cut concrete to set posts into new concrete, so be it. The Simpson ABA66Z Strong Tie brackets are pricey and I don't understand if this is a correct item to use or if there is an alternative product or less expensive option. I want to go with the least expensive method but am also not very interested in mixing a bunch of concrete either! I'd love to hear any of your ideas, suggestions. Many thanks!