afjes_2016
Established Member
- Joined
- Aug 28, 2016
- Messages
- 766
- Reaction score
- 361
Now it is time for me to do my next plumbing job.
It is the tub water system. The cold water squeels like hell and the knob here and there free turns when you shut it off or on and I have to tighten everything down each time. Long story of a person that owned this house (fixer upper) before me.
I have to cut access to the assembly of the hot/cold faucet and tub spout. This I will be doing this weekend sometime since it is a long weekend.
So I can order this part online this weekend what I need to know please is the name of the assembly that contains the hot and cold water knobs and tub spout and the show feed. I plan on using PEX to connect it to the existing copper pipes in the shower area and then down into the crawl space below. I may just connect the PEX to this assembly and then run the water lines down into the crawl space then into the basement area into where the PEX feeds it and connect from there and eliminate the copper piping.
Is there any specific type of this assembly (once you give me the name of it) that I should look for in the way of one is better than the other? Brand etc? To match the holes in the wall already I have three - hot cold and tub spout so it would have to match.
Thanks
It is the tub water system. The cold water squeels like hell and the knob here and there free turns when you shut it off or on and I have to tighten everything down each time. Long story of a person that owned this house (fixer upper) before me.
I have to cut access to the assembly of the hot/cold faucet and tub spout. This I will be doing this weekend sometime since it is a long weekend.
So I can order this part online this weekend what I need to know please is the name of the assembly that contains the hot and cold water knobs and tub spout and the show feed. I plan on using PEX to connect it to the existing copper pipes in the shower area and then down into the crawl space below. I may just connect the PEX to this assembly and then run the water lines down into the crawl space then into the basement area into where the PEX feeds it and connect from there and eliminate the copper piping.
Is there any specific type of this assembly (once you give me the name of it) that I should look for in the way of one is better than the other? Brand etc? To match the holes in the wall already I have three - hot cold and tub spout so it would have to match.
Thanks