Whirlpool dishwasher issue

Discussion in 'General Appliance Discussion' started by donald73d, Aug 12, 2018 at 5:46 PM.

Help Support House Repair Talk by donating using the link above.
  1. Aug 12, 2018 at 5:46 PM #1

    donald73d

    donald73d

    donald73d

    Active Member

    Joined:
    Sep 7, 2011
    Messages:
    40
    Likes Received:
    1
    I have a high end Whirlpool dishwasher that part way through must change cycles and then several times the pump tries to start, runs for 15 seconds. Then stops and waits for a minute. After awhile it gets past this and completes the entire wash. This does not sound right. But it's possibly on a wash that heats the water it starts, determines it's not hot enough and stops and waits and tries again. New home to me so I am not sure if it did this when new.

    I may turn off the heated wash option to see if it makes a difference.

    Other ideas?
     
  2. Aug 12, 2018 at 5:57 PM #2

    Snoonyb

    Snoonyb

    Snoonyb

    Well-Known Member

    Joined:
    Sep 30, 2006
    Messages:
    3,125
    Likes Received:
    558
    You should be able to download the manual.
     

Share This Page