Could use a little help as I am about to blow in some more insulation into my home. My question concerns baffles and blowing the insulation as close to soffit area - where the roof meets the attic floor. Right now when I am up there I can see daylight from my attic to the outside. I know proper ventalation is needed, but that much is silly. There are not many of those styrofoam baffle things between the rafters, so I was going to put more of those up. Then I wanted to get the blown insulation and get it up as close to possible to those baffles. Is that the right approach or dead wrong? I dont want to cause some sort of time vortex vacuum thing that causes moisture or heat issues. Just want to do it the right way, and from what i see up there now it was done half assed and wrong.