Recent content by comcarcab

This is a project just recently finished up. It's a barbecue seating area for around twelve people if you have any questions don't hesitate to ask! The ultimate picnic table To see how to build it yourself

Thanks I have added your website to my own website, I have friends on facebook who stop by from time 2 time who I am sure would use your service.I hope this is ok? If not let me know & I will remove Once again Thank you

Hi to everyone In the short week that I joined I am amazed & impressed with the wealth of knowledge that this community possesses.I have read some really interesting and informative post from both pro's & novices alike. I am a carpenter from South Florida and will only be too happy to be of help...

Hi there Before you do anything you should make sure that the building is adequately supported,by the look from the photo those 2x4's are not nearly enough to do the job.You should also get some advise about code from your city building inspector before removing the beam ,you may not be able to...

I would call out a building engineer or building inspector,new homes are sometimes prone to a little settlement but this sounds a bit more than that. Get a professional opinion ,if there is something amiss then at least you have a report to show to the construction company that built the...

I always use the rule double whatever the recommend time of the product is, given different climate & weather conditions this will ensure that the stain will dry sufficiently enough.

I would remove the loose splinters from the frame and the piece that came away,that should help it fit flusher. Really the only way for it to go back is to some how clamp it back,but if this is not an option I would glue & nail it back with some fine finishing nails assuming you don't have a...