Recent content by dndremodeling

I dont think it is ruined either. There are touch up kits that you can purchase to repair chips and scratches in tubs. Be careful to get the proper kit, either fiberglass or ceramic/porcelain. I think it will be ok, and I am sure that your local ACE, or Home Depot could assist you in the...

I remodeled an office that had commercial Armstrong Vinyl. I removed the floor by heating and tearing it up, then I used a black metal-oxide wheel in my drill and ground the remaining rough glue down. After I got the floor usable, I applied a floor leveler compound to give me a solid surface to...

Velux makes a really nice unit. I haven't had the pleasure of installing one, but I read the installation, not bad, it's called a "Sun Tunnel" and I believe Home Depot stocks a 10" version.

Square Eye is right... Its alot of work to jeopardize the construction of the doors, whether hollow, or solid core, Home Depot stocks a slab in 18",24",28",30",32",36" with a height of 78" or more commonly 80" depending on the area you live. I have installed interior doors on countless...

another posiblity is that the spings are worn out, causing the "sag" on one side of the door. I would watch the door open and shut a few times to see if there are any binding points, especially towards the bottom, also check the bottom strip as previously stated. A worn weather strip could prove...

Here is one of the many companies offering this product and service. http://www.liquidvinylsiding.net/ I would be very cautious. I have heard bad rumors of it, but it is only rumors and i have never used, nor seen this product in any form.

Most Bay/Bow units will always include a furniture grade Head and seat board. I find a good balance of quality for price at Home Depot. I have recommended and installed their windows on many occasions and have had no issues. You will need more than one guy to do the install obviously, and as...

I have become increasingly dissapointed with Ridgid. I bought a Ridgid tool combo 18v X2, was supposed to be the best for the buck. Nope. My 8yr old DeWalt 18v has more power and twice the run time on a charge then this new "high tech" tool. I love my new Makita 18v Lithium Ion kit... I swear...

Hey, this is Donnie from D & D Remodeling Solutions, LLC. I have been in the home construction and remodeling business for umpteen years. I have extensive expertise on exteriors, as well as, vast knowledge of kitchen and bath, general remodeling, and home building. I have a staff Interior...