Recent content by GWS

Thanks for all the help. So far today it's been working OK. Keeping my fingers crossed. Thanks again GWS

I checkrd transformer it seems to be OK. I was looking at outside unit this am. I used a wooden dowl rod and pushed the contact points together and the compressor and fan came on and ran until I released pressure on points. I pushed what appeared to be a reset button and the unit ran for about...

Sorry Glenn I am new at forums and may have asked you new question more than once. > I put in new condensor fan and capacitor, fan came on but only ran about an hour and shut off. The inside fan blows cold air through registers but the outside condensor fan doesn't come on. Any suggestions...

Hi Glenn, I put in new condensor fan motor and new capacitor the fan came on, but it only ran for about an hour and shut off again. The inside fan blows cold air through the hous but the outside condensor fan won't start again. ANy suggestions as to what to try next? Thanks GWS

Thank you Glenn I will try that

I am new to forum. I have a Lennox model # HS26-036-2P whole house A/C unit. The fan motor in the outside condensor, (Emerson motor Part # 65G6001) will only run if I give the fan blade a little push than it seems to run OK. Does this sound like the motor is going bad or is there a starter...