Things are progressing slowly. I've decided to at least hang the starter strip before I finish out the Soffit. This is for two reasons. One, I want to make sure I don't end up with a skinny piece of siding at the top, and two, the vinyl soffit is 12", however the opening is 13".
In order to...
I decided to go ahead and take it all down. Well, 70% of it anyway as the remaining 30% is where it needs to be.
Thanks Roofmaster for the continued advice. I will be doing the 6" as you have recommended. I'll take a progress pic tonight and post in the AM.
Well, Everything was just dropped off at the house. It appears I have made a little bit of a mistake. When i took the initial measurement for the fascia, I only measured two sides. One side was 6" and the other was 4". The 4" side needed to be replaced anyway, so I was planning to do that...
I have removed all of the soffit leaving the fascia board in tact. Below are a couple more pictures to show what it looks like now....
Can I go through and do the Soffit/Fascia first? Then do the sidding? Or do you have to side up to the soffit so you know where to hang the...
Good day Ladies and Gents, My name is Jeremy and I am a homeowner working my way towards finishing a remodeling project. Over the last year, I have completely gutted and refinished my house on the inside. I am now living there, and I'm turning my attention to the outside. Below is a picture...