I'm no expert, but here's what my grandma would tell you ...
- carefully clean off anything 'loose' re your old sealer with a soft brush
- apply new oil based wood primer over any areas that the old sealer has flaked off
- spray a new layer of oil based wood primer over the top of the...
^^^ yeah, agreed re Behr paint and Home Depot personnel ( or Valspar paint and Lowe's personnel, or Ben Moore paint and Ace Hardware personnel etc.). I recently finished a metal roof repainting project that involved special ordering the 'right' kind of Behr premium exterior primer and 100%...
Hello everyone. I wish that I had found this forum before embarking on this project, but better late than never. At any rate, I'm looking for opinions as to whether I screwed up or not during a recent repainting of my metal house roof.
The story begins when I replaced my dilapidated asphalt...
Not pretending to be an expert here, but in the absence of exact specs ...
- the run ( main ) winding will always have the higher ohm value
- the start ( auxiliary ) winding will always have the lower ohm value
- you can find the 'common' wire by comparing the ohm readings between all...