Recent content by sdupp

Never mind folks I retired it to the recycling center. Over priced piece of crap......

Fridge Not cooling enough. Went from 30s to 60s. Repair guy said it might be Temp control board. We replaced it and did NOT solve cooling issues. Any suggestions would be appreciated! No one around here knows how to work on these refrigerators. Authorize service center over 3 hours away. Fridge...

I read the code info and had a feeling it might be the door lock operation and or door switch. I removed it and it appears to be working OK also did a continuity test on the switch and is OK as well. Put it all back together and wale everything is working OK again. Knock on wood! Sitting here...

I did that and it worked a couple times. Now it does nothing.

Whirlpool Microwave got F2 code. Any suggestions where to start? The unit is 10 years old. Model MH1150XMS-2 Thanks!

My new Samsung refrigerator says to turn off the water before replacing filter. Just curious what other folks are doing. It’s a pain to pull the refrigerator out. I did not have to do this with my old Whirlpool. Thanks!! Stan Dupp

Looking for Hot Water Heater Recommendations. I currently have an electric 10 year old builder grade 50 gallon tank. The tank is located in a garage closet. I live in SC and the temperature in the garage is not regulated. Anyone have experience with the Heat Pump (Hybrid) hot water heaters...

Well we finally got her done. Removed the brackets from the rear and sides and removed the glass top to access the burner and did a continuity test. The burner was good, turned out to be the switch. Thanks for all the encouragement. It was an easy job...... :clap:

Thanks for the reply. I'm going give it try later this week. The main difference is all the electrical controls are in the front of my stove instead of the back. Much Appreciated!

I need to gain access and replace the front left burner on my stove. KESA907PSS02 Can you folks tell me how to remove the cook top. It appears to be different from the typical stoves. I can't find a video that looks similar to this stove. Thanks! Stan

Fix the problem finally. Removed the front cover housing (2 screws at the bottom) Replaced Dispenser motor. It was much easier then I thought it was going to be. :clap:

Thanks for you help! Dispenser parts list on page 13/14 http://www.mediafire.com/view/lx753d59ysam2r3/WHIRLPOOL_FRIDGE_Repair_Part_List.pdf

When I press on the pad with a glass I do hear a click and the small door opening where the ice comes out. Just the dispensing motor won't turn most of the time. Sounds like your on to something. I'm not sure how to remove the the Dispensing unit. Can't find a video that looks exactly like mine...

Intermittent problem just got worse. When pressing the pad for ice to dispense, it works intermittently. I removed the ice container and made sure it's not binding. Any suggestions? Could the dispensing motor be going bad? Whirlpool Side by Side Fridge GS6NBEXRL00 The fridge is around 9 years

Thanks Jeff, The console panel is fried, come to find out we had a huge thunder storm while on vacation. Decided to replace the machine. We always had problems with snags & pulls destroying our towels. Note to self, never buy a Calypso washer!!!! Stan Dupp