Recent content by sfrisby

Still working on this. Anyone have any other ideas based on what the above process has ruled out? Thanks for your help.

Does the fact you can get water out of the door not demonstrate power and pressure or is that separate from what extends beyond the door and into the ice maker? But to answer your question, no, I have not checked for power. You are referencing the water inlet valve? What I'm trying to...

Been out of town and finally got to removing the ice maker and heating the water line with a hair dryer. Nothing changed, so I am back to square one. Any other suggestions, folks? Thanks.

Sorry, in my head I was stating that turning off the ice maker did not work. I will take a hair dryer to the connection and report back. Thanks.

In order to address this possibility, I turned off the ice maker for about 3 or 4 days. When off, cold air is no longer blown into the ice maker. Would you think this would suffice to melt anything possibly frozen over in the line?

I have an LG LFX25950 refrigerator where the ice maker is not making ice but the water dispenser in the door works just fine. The ice maker cycles through properly. I even filled the icemaker molds manually and it properly froze and released the cubes into the ice bucket. So, it seems the...

Threw my back out so this project has been on the back burner lately. Got back to it yesterday. Up to this point, I used the air compressor on the pipe that connects to the shower head. Yesterday, I put the head back on and removed the cartridge and balance spool again. I then blew air into...

As an update, I tried to run a snake down the shower head pipe but the bend was too tight to get it through. I also used my air compressor, as suggested, with the pipe open, to try to blow anything out of the shower head pipe. No dice. If anyone has any further brain storming ideas before I...

I am getting poor to minimal flow out of 1 shower head. Sink in the same bathroom works fine. I have removed the shower head and still poor flow out of the pipe. I have bypassed the restrictor plate. I have swapped the pressure balancing spool and cartridge with another functional shower in...