Recent content by star1k

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    Add circuit

    I am no expert, but all panels that I see around here do have main wires connected to the breakers and not directly to the panel. This house was build in 1994 and it was "builder's special" so i am not surprised.
  2. S

    Add circuit

    Ok there is a picture of the panel with the model. I spoke with a few electricians one told me that yes breakers are different and needed to be replaced as it is a code violation. He gave me a quote for replacing all incorrect breakers, adding a ground bar, adding the required circuit and...
  3. S

    Add circuit

    Thank you
  4. S

    Add circuit

    There is no separate ground bar. It appears as the bare copper wire coming from the Right lower part and connected directly to the bass bar with all white wires.
  5. S

    Add circuit

    Yes, it is only one panel. The only sticker is can see is already on the picture " Underwriters Laboratories Inc Class CTL Enclosed Panelboard No {something here 1 of 2 symbols} 362008" I thought i had a different angle for the sticker, I will post it later today once I get home. How or...
  6. S

    Add circuit

    Thank you for your reply. Yes, I do have a gas range and a gas water heater. 30 amp breaker is for AC condenser. I do not have a lot of high loads ( as far as I know) the most load is for the electric kettle and microwave and fridge The most obvious way is to add a sub-panel or replace the...
  7. S

    Add circuit

    Hello, I need to add a 240 v 20 amp circuit to charge my Hybrid car. What are my options based on this panel? Thank you
Back
Top