brewer55
Junior Member
- Joined
- Dec 20, 2010
- Messages
- 43
- Reaction score
- 5
I had a Daikin mini-split system (Model FTXN09KEVJU5) installed this past February. Although the air conditioning seems to be working well (blowing cold air) and the temperature is where it should be for the setting, the humidity in the room when I get up in the morning is rather high and in the mid 60's. (I put a temperature and humidity device on my nightstand). It used to be in the low 50's. Anyway, I started doing some troubleshooting and I noticed that the PVC for the drain (condensation removal) was bone dry. My first thought was it was blocked maybe because insects or a critter made a home in the pvc. I ran a metal snake all the way to where it stopped where it elbows into the unit (on the outside wall of the house) and there was no apparent blockage. I did not do the installation and am a little gun shy about how to go about removing the front panel and doing an inspection from inside the unit to see if there is some blockage of the drain pipe.
Any advice would be appreciated.
Any advice would be appreciated.
Last edited: