Ok, got a nearly 20y old GE dryer here. Worked fine for a long time. I replaced the heating element once. Today it started making weird noises like it was running fast and then it stopped. Trying to start it makes that noise that electric motors make when they don't have enough juice to turn or something is jammed.
I've opened the cabinet. The drum turns by hand with moderate effort. The "glides" that support the front are pretty worn, but not worn through. The belt looks ok and is fairly tight. So it's either the motor itself, or the drum bearing, right? Is the next step to remove the drum and see if the motor runs with no load?
Thanks!
I've opened the cabinet. The drum turns by hand with moderate effort. The "glides" that support the front are pretty worn, but not worn through. The belt looks ok and is fairly tight. So it's either the motor itself, or the drum bearing, right? Is the next step to remove the drum and see if the motor runs with no load?
Thanks!