RossAnabel
New Member
- Joined
- May 19, 2016
- Messages
- 4
- Reaction score
- 1
I have just purchased a 70s Ranch style house with saggy drywall in the LR and Dining Area. Rafter construction, joists are 2x6x12', 16 OC, 10" cellulose insulation.
I've read lots about pillowing, sagging between 24 OC joists, but this sagging runs perpendicular to the joists and 4' OC. My theory is that original construction was glued board with screws only at the edges, the glue failing at some point during the past 40 years.
Is the anyone who has experience with this or suggestions?
I've read lots about pillowing, sagging between 24 OC joists, but this sagging runs perpendicular to the joists and 4' OC. My theory is that original construction was glued board with screws only at the edges, the glue failing at some point during the past 40 years.
Is the anyone who has experience with this or suggestions?