---Welcome to the forums!---------
Screws are wrong for the application here, if using resilient. Use ring-shank nails or screw shank nails, no longer that the total of the two panel thickness- 1-1/4". Pull the screws, use them when you build a deck or install sub-floor. Don't angle nail, fill the end joints; http://www.norbord.com/na/cms/wp-content/uploads/L335M.pdf
Gary
Screws are wrong for the application here, if using resilient. Use ring-shank nails or screw shank nails, no longer that the total of the two panel thickness- 1-1/4". Pull the screws, use them when you build a deck or install sub-floor. Don't angle nail, fill the end joints; http://www.norbord.com/na/cms/wp-content/uploads/L335M.pdf
Gary