I own a house circa ~1940. The toilet flange was fractured and the tile also cracked in that bathroom, so I removed the tile to find:
- 2. Drill out enough lead to remove the old pipe.
- 3. Install a Fernco cast hub insert to a 4"x3" 90 deg bend.
- 4. Insert PVC Flange - should this be a slip flange?
Thank You for any advise!
- The tile was laid over old tile that had been laid over concrete.
- The hot water pipe to the sink runs under the middle of the floor and the bathtub.
- The broken flange and drain pipe are now exposed. I plan to:
- 2. Drill out enough lead to remove the old pipe.
- 3. Install a Fernco cast hub insert to a 4"x3" 90 deg bend.
- 4. Insert PVC Flange - should this be a slip flange?
Thank You for any advise!