robertn84
Member
- Joined
- Jan 27, 2017
- Messages
- 5
- Reaction score
- 1
I want to seal an old, exposed chimney to bring out the brick's beauty.
What is the best sealant product to give it that "wet" look? I want little to no gloss. I have a bucket of 100% acrylic from Menard's but read that can blister (at least in an exterior application). Also there is a white spot missing a brick. It is very, very flakey. Should I refill this in with newer masonry?
It was previously covered in plaster that we chiseled off. I have scrubbed it with dish soap.
Viewable here: https://drive.google.com/open?id=0B8ewTVsrutKKUFl2LW83UksyYkU
https://drive.google.com/open?id=0B8ewTVsrutKKUFl2LW83UksyYkU
What is the best sealant product to give it that "wet" look? I want little to no gloss. I have a bucket of 100% acrylic from Menard's but read that can blister (at least in an exterior application). Also there is a white spot missing a brick. It is very, very flakey. Should I refill this in with newer masonry?
It was previously covered in plaster that we chiseled off. I have scrubbed it with dish soap.
Viewable here: https://drive.google.com/open?id=0B8ewTVsrutKKUFl2LW83UksyYkU
https://drive.google.com/open?id=0B8ewTVsrutKKUFl2LW83UksyYkU