zepper
Well-Known Member
- Joined
- Oct 13, 2009
- Messages
- 178
- Reaction score
- 62
Hey guys I've just installed a new kitchen sink. Unfortunately, I didn't notice that the dishwasher drain "Y" connector the guy at the hardware store gave was about 1/8" too small for our hose, and the clamp doesn't seal it.
The "Y" is cemented in, and I'm not really up to replacing the hose (whose end is apparently nondetachable, despite the upper clamp).
Is there an easy fix for this? Can I wrap some extra material around the "Y" before clamping, and/or apply some kind of compound? Thanks!
The "Y" is cemented in, and I'm not really up to replacing the hose (whose end is apparently nondetachable, despite the upper clamp).
Is there an easy fix for this? Can I wrap some extra material around the "Y" before clamping, and/or apply some kind of compound? Thanks!