WyrTwister
Well-Known Member
- Joined
- May 26, 2014
- Messages
- 341
- Reaction score
- 60
My guess is , the white is hot & the switch leg is the black ( where they are feed from , I have no idea ) .
A non contact voltage tester should glow , on the hot . If neither is hot , you have to go investigate some where else in the house or garage .
( If you have a bare ground wire & it is connected properly , a contact volt meter will tell you if the white ot black is hot . )
God bless
Wyr
A non contact voltage tester should glow , on the hot . If neither is hot , you have to go investigate some where else in the house or garage .
( If you have a bare ground wire & it is connected properly , a contact volt meter will tell you if the white ot black is hot . )
God bless
Wyr