hotrodjohn71
New Member
- Joined
- Jan 7, 2016
- Messages
- 4
- Reaction score
- 0
Hello group.
I have window framing question. I am building some walls (non load bearing) on a covered patio. I have some dual paned non framed windows I want to install. These windows are just 2 pieces of glass with a hollow square aluminum spacer between that runs the edges but not making an outer, frame and held together by silicone. These windows came from a sun room.
My question regarding the installation of these windows into the wall frame is what should I use as far as sealing the window edges as they are installed into the wall frame, and approximately how much gap should I leave between the windows and the wall frame I will be building. These window units are large, approximately 80" x 35".
Thanks
I have window framing question. I am building some walls (non load bearing) on a covered patio. I have some dual paned non framed windows I want to install. These windows are just 2 pieces of glass with a hollow square aluminum spacer between that runs the edges but not making an outer, frame and held together by silicone. These windows came from a sun room.
My question regarding the installation of these windows into the wall frame is what should I use as far as sealing the window edges as they are installed into the wall frame, and approximately how much gap should I leave between the windows and the wall frame I will be building. These window units are large, approximately 80" x 35".
Thanks