DigitalBenny
Member
- Joined
- Jan 21, 2018
- Messages
- 9
- Reaction score
- 1
Want to put a 40A single pole breaker in my box. Run 6/3 NM-B to a 14-50R outdoor receptacle. 50A RV cord with 14-50P on one end and SS2-50R female twistlock on the other. Vehicle will have 50A inlet to my inverter setup.
The inverter will pass 30A through to allow me to use my equipment on shore power. But the inverter's built-in charger will be drawing power additionally, not to exceed 40A total. This is NOT 240v, NOT 2 split 120v circuits (like an RV) this is a SINGLE 120v circuit...
Will this setup work?
(Posted in DIY Chatroom, no response...)
Sent from my E6883 using Tapatalk
The inverter will pass 30A through to allow me to use my equipment on shore power. But the inverter's built-in charger will be drawing power additionally, not to exceed 40A total. This is NOT 240v, NOT 2 split 120v circuits (like an RV) this is a SINGLE 120v circuit...
Will this setup work?
(Posted in DIY Chatroom, no response...)
Sent from my E6883 using Tapatalk