Hey all, thanks in advance to anyone reading this or offering advice.
I have an old 2 1/2 storey house with hot water heat. The main floor radiators all heat great except for one in the front corner of the house. The 2nd floor radiators also all heat great except for the one in the bedroom in that same corner. There's only one radiator on the third floor, and it is right in that same corner, so of course, it also isn't heating. I have bled all the radiators, from bottom to top (not sure if the order matters). I've read that the pressure should be at 18psi for a 3 level home, mine is at 20. That's about the extent of my troubleshooting knowledge at this point. Anybody got any ideas?
Thanks again!
I have an old 2 1/2 storey house with hot water heat. The main floor radiators all heat great except for one in the front corner of the house. The 2nd floor radiators also all heat great except for the one in the bedroom in that same corner. There's only one radiator on the third floor, and it is right in that same corner, so of course, it also isn't heating. I have bled all the radiators, from bottom to top (not sure if the order matters). I've read that the pressure should be at 18psi for a 3 level home, mine is at 20. That's about the extent of my troubleshooting knowledge at this point. Anybody got any ideas?
Thanks again!