So my Amana dishwasher (model adb1200aws) isn't fully draining water at the end of the cycle. It certainly appears water is being drained, just not all of it, as the water isn't up to the float assembly. The dishwasher is capable of draining, its simply not draining all the water. At the end of the cycle, I just hit "Stop/Cancel" and it reactivates the drain pump to fully drain the rest of the water. I've checked a lot of the basic things. Here's what I know:
- The drain tube is clear, and not the problem.
- I do not drain into a garbage disposal, so there's no issues related to that.
- The drain hookup also doesn't use an air gap (basically the drain tube just rests in an open ended vertical pvc pipe)
- I've disassembled the drain basket and made sure there was no food clogging any of the screens leading up to the drain pump.
- I've replaced the drain pump.
- When I "Stop/Cancel" at the end of the a cycle (when water is still left) it runs for the appropriate amount of time (2 minutes).