coldinindy
New Member
- Joined
- Oct 9, 2012
- Messages
- 2
- Reaction score
- 0
The blower motor won't move when it should. If I open the furnace and move the fan the motor works for a while and slows then stops. There is a hum coming from the section the fan is in when the motor should be running. Same is true for either in furnace mode or just fan set to 'on'.
There's a schematic on the inside panel and a spec sheet but neither of them tell me who made the furnace.
Thanks for any help.
There's a schematic on the inside panel and a spec sheet but neither of them tell me who made the furnace.
Thanks for any help.