Ok here is the deal. We are working with an older furnace probably before 1977 now it works but don't know if it is the furnace or thermostat. The Thermostat is set for 72 degrees in the house and it is 65 it only runs for like 5 minutes or so and then shuts off. If I manually go to the thermostat and turn it off and then turn it back on it kicks the heat back on. for just a little while. Now this Whole past week it has been in the single digits here, but i know if my desired temp is not met it will keep running I thought until it reached it.
I have one of those Thermostats that can be programmed to turn on at certain times of the day. I was thinking it was the Thermostat but also after reading some of the threads here it sounds like a flame sensor but I have an older furnace and it may not have one. Any help is greatly appriciated.
Jonny
St. Louis, MO
I have one of those Thermostats that can be programmed to turn on at certain times of the day. I was thinking it was the Thermostat but also after reading some of the threads here it sounds like a flame sensor but I have an older furnace and it may not have one. Any help is greatly appriciated.
Jonny
St. Louis, MO