Doorbell wiring

SpartanEpoxies
Shop deals on ebay
shop deals on amazon
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
S

Sesely

Member
Joined
Feb 22, 2012
Messages
9
Reaction score
0
Am trying to install a new doorbell. There is power, I just don't know how to wire it. I have three red wires and three white wires. I have them labeled transformer, front and back. I know where the red wires go, but where do I put the white wires? Do I just nut them together? There is nowhere on the bock to screw them in... Help please
 
Look in the manual for the door bell. I would expect terminals for front, back and power to be labelled.
 
They are labeled, but I have 6 wires, do I connect two wires to each terminal or do I attached one wire to each terminal and nut the other three together? I have three red wires and three white wires.
 
You need to know where those wires go.
 
Connect the white wire from the "transformer" pair to the common terminal, wirenut the red wires together, connect the white wires the respective "front' and "rear" terminals.
 
You must log in or register to reply here.

Latest posts

Back
Top