My husband and I noticed that our toilet was leaking from the tank to bowl area when we flushed. We quickly identified that the tank to bowl gasket was in need of replaced. We bought a kit from Home Depot and followed the instructions:
(screw, metal washer, rubber washer, tank, rubber washer, nut, bowl, metal washer, nut)
We have a Briggs 4930 toilet. Everything fit nicely and the tank was did not move once we put it together. We flushed the toilet and no leak.
Well, leave it alone for a few hours and we noticed the screws were wet and there seemed to be some moisture in the crack where the tank sits on the toilet.
We are baffled and so frustrated. Any help would be appreciated! :help:
Side note...I have heard to NOT put a metal washer in the tank...but one was in there before.
(screw, metal washer, rubber washer, tank, rubber washer, nut, bowl, metal washer, nut)
We have a Briggs 4930 toilet. Everything fit nicely and the tank was did not move once we put it together. We flushed the toilet and no leak.
Well, leave it alone for a few hours and we noticed the screws were wet and there seemed to be some moisture in the crack where the tank sits on the toilet.
We are baffled and so frustrated. Any help would be appreciated! :help:
Side note...I have heard to NOT put a metal washer in the tank...but one was in there before.