markalexan
New Member
- Joined
- Jun 20, 2015
- Messages
- 3
- Reaction score
- 0
We have a new home with a domestic well. The cut pressure is 45psi and the cutoff pressure is about 63psi. The lines from the maniblock are 3/8" pex and the main line to the maniblock is 3/4".
Our problem is that there is low water volume to all faucets and fixtures. My outside hose bibs do not have sufficient flow to even operate a sprinkler. From what I have read the pressure is correct. I measured the static pressure at one of the hose bibs and it was about 58. Is the 3/8" pex too small to provide sufficient flow?
Our problem is that there is low water volume to all faucets and fixtures. My outside hose bibs do not have sufficient flow to even operate a sprinkler. From what I have read the pressure is correct. I measured the static pressure at one of the hose bibs and it was about 58. Is the 3/8" pex too small to provide sufficient flow?