I am renovating my kitchen, and I need to use a 4 gang switch box. It will control:
1. 3 6in can lights
2. two main overhead lights
3. one outside porch light
4. one run of above cabinet rope lights
Now I have no problem wiring one switch or an outlet, and have even sucessfully wired up a 2 gang box, but this is above my head. There is one supply line(10/2). Four switches that only have one set of connections, a neutral, load, ground. There are no terminals for tailing off to another switch. Four lines going out to said lighting.
I know all the grounds have to get connected. There will be 9 total, so Im thinking one bundle of 4 wires and one of 5 connected with a pigtail. After that Im lost. Please help, and a diagram if you know of one would be wonderfull.
1. 3 6in can lights
2. two main overhead lights
3. one outside porch light
4. one run of above cabinet rope lights
Now I have no problem wiring one switch or an outlet, and have even sucessfully wired up a 2 gang box, but this is above my head. There is one supply line(10/2). Four switches that only have one set of connections, a neutral, load, ground. There are no terminals for tailing off to another switch. Four lines going out to said lighting.
I know all the grounds have to get connected. There will be 9 total, so Im thinking one bundle of 4 wires and one of 5 connected with a pigtail. After that Im lost. Please help, and a diagram if you know of one would be wonderfull.