Jabberwalkie
New Member
- Joined
- Jan 18, 2011
- Messages
- 4
- Reaction score
- 0
I am renting a place where an air exchanger was installed, and never worked from day one. I have gone through all the wiring systematically, and deduced that the controls are wired properly as well and the controller on the side of the unit. The mother board has two jumpers (red and black) that feed the fans both of which have 45 volts or 4.5 volts it then leads to a capacitor and nothing is coming out the other end of the capacitor. any suggestions . Greentek air exchanger model 3.12