oldbikedude
Member
- Joined
- Jan 13, 2013
- Messages
- 5
- Reaction score
- 0
Hello, I have an older Comfortmaker heatpump with electric backup heat. My defrost board went bad so I bought a replacement. The board I had was a "Potter Brumfield 34332100". I could not find one of those so I bought a "Amana Goodman LR40061". This is supposed to be a replacement for my old board but the connections are very different. I need to know how to hook this board up. I have a red,yellow,orange,black & white from the inside unit. I know the red is 24v all the time, I think the black is the common, but I have more male spade connections than that on the board. I am straight on the fan relay & the defrost sensor but the other wires from the inside unit & the comp contactor coil wire don't work out the way the old board was. I'm thinking I might need some jumper wires on this board to make it work. I hope someone has a schematic for this board.....I can't find one. Please help it's getting cold out & electric heat is $$$$$$$. Thanks in advance.
Last edited: