my problem is the following. I would like to add hot/neutral/ground wires to an existing outlet to power ceiling fan. i have already run the romex cable now i need to properly connect it in the outlet. the outlet is the following. it used to have one bridge broken. one bridge not broken. part of the outlet is always hot. the other part of the outlet is only then hot when I flip the switch on the wall. i wanted to connect ceiling fan to the part of the outlet that can be hot when the switch is flipped..so in effect when I flip the switch the fan starts running (light is on). I have done this excersise twice already in a different apartment. in each case both sides of the outlet had both bridges broken. this one is different and I am lost. I provide video and pictures. I hope it will help - really appreciate any input - thanks
[ame=http://www.youtube.com/watch?v=MxfkQeSn1Sw]Wiring - YouTube[/ame]
https://picasaweb.google.com/107560870018816768514/Desktop?authkey=Gv1sRgCJOXgaC2uITjNw
[ame=http://www.youtube.com/watch?v=MxfkQeSn1Sw]Wiring - YouTube[/ame]
https://picasaweb.google.com/107560870018816768514/Desktop?authkey=Gv1sRgCJOXgaC2uITjNw