Okay, thanks guys. I decided to take some photos for your guys' viewing pleasure. It was definitely an issue around here. Look at the breaker, it is burned up on the side that I could not get a reading out of. There is a bit of burn marks and dust, that I just blew off a bit inside the panel where the breaker was. I'm not going to touch or attempt to clean that without the panel being turned off. I just blew it off a bit with some air, and now I'm just going to replace the breaker.
Also, I looked online, and could not find the exact breaker. This breaker is very old. Made by a company called Crouse Hinds. Apparently, that is now a division of a company called Eaton. Can't I just buy a 30 Amp double pole Eaton as a replacement? Or does it need to be the exact same old one, because I don't think I can find a Crouse Hinds double pole 30 Amp breaker.
Also, I looked online, and could not find the exact breaker. This breaker is very old. Made by a company called Crouse Hinds. Apparently, that is now a division of a company called Eaton. Can't I just buy a 30 Amp double pole Eaton as a replacement? Or does it need to be the exact same old one, because I don't think I can find a Crouse Hinds double pole 30 Amp breaker.