LeakingFaucet
Junior Member
- Joined
- Apr 28, 2014
- Messages
- 27
- Reaction score
- 5
I'm running new cat6 cable under my house / in a crawlspace. I don't want the cables dangling like a massive jumprope.
I see that the power / rg6 lines are stapled to the joists.
What should I use to attach the cat6 cable to the joists? I was thinking a staple gun would apply too much force and would crush the cable and ruin the runs. I was also thinking about coax staples.
Something like this => http://www.homedepot.com/p/Gardner-...-Coaxial-Staple-Gray-50-Pack-PSG-50/202906374
Can anyone chime in with what's common practice? Code for low voltage runs?
I see that the power / rg6 lines are stapled to the joists.
What should I use to attach the cat6 cable to the joists? I was thinking a staple gun would apply too much force and would crush the cable and ruin the runs. I was also thinking about coax staples.
Something like this => http://www.homedepot.com/p/Gardner-...-Coaxial-Staple-Gray-50-Pack-PSG-50/202906374
Can anyone chime in with what's common practice? Code for low voltage runs?