F farmerjohn1324 Well-Known Member Joined Aug 5, 2016 Messages 963 Reaction score 103 Sep 9, 2016 #1 The one on the right side of the photo. I can't find screws anywhere.
B beachguy005 Well-Known Member Joined Sep 25, 2012 Messages 844 Reaction score 311 Sep 10, 2016 #2 Are you looking to take the pane out of its frame or the door out of the track frame?
S Snoonyb Well-Known Member Joined Sep 30, 2006 Messages 5,763 Reaction score 1,526 Sep 10, 2016 #3 The fixed panel may be held in place by pressure clamps at the top and bottom end and screwed into the frame of the panel. There may also be a block or stop device that prevents the panel from being lifted, at the top.
The fixed panel may be held in place by pressure clamps at the top and bottom end and screwed into the frame of the panel. There may also be a block or stop device that prevents the panel from being lifted, at the top.
slownsteady Well-Known Member Joined Jun 5, 2009 Messages 7,209 Reaction score 1,478 Location South Hills, Pittsburgh, PA Sep 10, 2016 #4 The sliding panel can usually be lifted off the lower track and tilted out, then lowered so that it clears the upper track.
The sliding panel can usually be lifted off the lower track and tilted out, then lowered so that it clears the upper track.