srercrcr New Member Joined Feb 15, 2015 Messages 4 Reaction score 0 Feb 15, 2015 #1 It's a sturdy rod. Both ends contact ceramic glazed tile. About once a year the rod falls (Newton was right!). Looking for experienced insight on how to solve. Thx.
It's a sturdy rod. Both ends contact ceramic glazed tile. About once a year the rod falls (Newton was right!). Looking for experienced insight on how to solve. Thx.
frodo Senior Member Joined Aug 5, 2008 Messages 3,067 Reaction score 1,204 Feb 15, 2015 #2 http://screencast.com/t/YX0VDzy01y I got tired of it, installed 2 of these and a 3/4'' pipe. I can do pullups on it :banana:
http://screencast.com/t/YX0VDzy01y I got tired of it, installed 2 of these and a 3/4'' pipe. I can do pullups on it :banana:
bud16415 Fixer Upper Staff member Admin Moderator Joined Feb 5, 2013 Messages 7,496 Reaction score 3,046 Location Erie, PA Feb 15, 2015 #3 get some 3M double stick foam tape at hardware and cut a circle of it for each end and pop it back up.
get some 3M double stick foam tape at hardware and cut a circle of it for each end and pop it back up.
B beachguy005 Well-Known Member Joined Sep 25, 2012 Messages 844 Reaction score 311 Feb 15, 2015 #4 I just used a flat rubber washer, about the same diameter and under the ends. Tighten it down and never have an issue.
I just used a flat rubber washer, about the same diameter and under the ends. Tighten it down and never have an issue.
srercrcr New Member Joined Feb 15, 2015 Messages 4 Reaction score 0 Feb 15, 2015 #5 It has a flat rubber washer now. I think I'll try the 3M tape, can't imagine it going anywhere. Thanks all!!!!
It has a flat rubber washer now. I think I'll try the 3M tape, can't imagine it going anywhere. Thanks all!!!!
nealtw Contractor retired Joined Nov 4, 2010 Messages 24,775 Reaction score 3,417 Location Chiliwack BC Canada Feb 15, 2015 #6 They are adjustable take it down and turn the ends, adds tention.