project1830
New Member
- Joined
- Apr 4, 2011
- Messages
- 1
- Reaction score
- 0
Hi, We have a wonderful old home 1830 built. The floor in the back side does a drastic slope of about 3 inches going to the outside wall. The house sills etc appear to be ok...so with that we want to raise the floor to the back of the house to match a grade we have determined. Any suggestions on how to do this would be greatly appeciated. We have thought of starting with a 2 x 4 on the far end and then dropping the height of the supports until we get to the existing grade, with laying our plywood on top. The final end will be at 1/2" to meet exisitng floor. any thoughts would be greatly appreciated