I have an underground 12-2 cable that feeds the well from a temporary pole. The pole will be removed soon, so I need to bring the cable into the service panel. This cable is not in a conduit.
I can drill a hole thru the wall* and run a conduit from xx inches below ground level to a 90 degree elbow and thru the hole. Maybe a weather proof box outside? A box inside?
What is the usual way to bring an underground cable inside?
I already have a weather proof box with GFCI outlets in the vicinity, but I don't think there is enough room to bring the well cable into and thru the GFCI box to the panel inside.
*This is a pole building with sheet metal walls.
See this thread for building wall photo:
http://www.houserepairtalk.com/f32/additional-weight-truss-9182/
thanks
rick
I can drill a hole thru the wall* and run a conduit from xx inches below ground level to a 90 degree elbow and thru the hole. Maybe a weather proof box outside? A box inside?
What is the usual way to bring an underground cable inside?
I already have a weather proof box with GFCI outlets in the vicinity, but I don't think there is enough room to bring the well cable into and thru the GFCI box to the panel inside.
*This is a pole building with sheet metal walls.
See this thread for building wall photo:
http://www.houserepairtalk.com/f32/additional-weight-truss-9182/
thanks
rick