C
Chris
Guest
In that case you should have left the gas on.
Random Tips for Nobody in Particular
- Thread starter slownsteady
- Start date
Help Support House Repair Talk:
nealtw
Contractor retired
Actually, I got a bonus day off because the insurance wasn't covering it until the extinguisher was installed.
If you have to make a level cut thru pvc and don't have a miter saw, wrap a piece of paper around the pipe so it overlaps while maintaining a level line then draw a line around the top of the paper and you;ll have a line you can follow with your hacksaw, etc.
nealtw
Contractor retired
Actually you would call that a square cut.
Plumbing is not usually on the level.:trophy:
nealtw
Contractor retired
That's OK it is still a very good tip, we used to put a 7" pipe in the concrete forms for foundations so the plumbers could run their sewer lines thru the wall.
Always just wrapped the building plans around the pipe and marked a square line.
Gee nealtw, I'm not sure, would that be a plumb cut or a paper cut ? :trophy:
