OK, Long story short. Have a receptacle in the kitchen with the reset switch. It burned out a long time back and melted the plastic housing. Put a new one in and wired it the same way, now two outlet to the left of it do not work (although they test for 110v on a cheap power tester) and one outlet to the right does not work.
I replaced with a GFCI, but not sure if that is the one I should be using. The receptacle has two sets of black and white whites wires, with a common ground.
Any help, before I call a electrician?? I am pretty versed with handy man work, so want to do this myself if possible.
I replaced with a GFCI, but not sure if that is the one I should be using. The receptacle has two sets of black and white whites wires, with a common ground.
Any help, before I call a electrician?? I am pretty versed with handy man work, so want to do this myself if possible.