paul52446m
Well-Known Member
- Joined
- Oct 6, 2010
- Messages
- 435
- Reaction score
- 1
this assumes my thermostat does not have a heat anticipator ...what if it does ? I should be able to open it up and see inside if there is some thing to adjust ...that would be the heat anticipator, correct ?
I do not use a heat anticipator on hot water heat, so if you have one run it up to hi setting like 1.2 amp. If you do want to use it then you would have to take a amp check at the stat and set it to that reading, but like i said you do not need it so set it hi so you don't short cycle. Paul