DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > T1-11 installed at a 45?




Help Support House Repair Talk by donating using the link above.
Reply
 
Thread Tools Search this Thread
Old 09-12-2017, 06:04 PM  
RussD
Junior Member
Join Date: Sep 2017
Posts: 1
Default T1-11 installed at a 45?

Hey all, first post on this site
I bought a home that was built in 79. The siding appears to be T1-11, but is at a 45 degree angle. It has wood rot and needs replaced. Fortunately,the area that is bad is not too big.
My question is this, A. Might it not be T1-11? When I remove, can I reinstall T1-11 at an angle (45 degree)?


Click image for larger version

Name:	Siding.JPG
Views:	30
Size:	110.1 KB
ID:	14628  
RussD is offline  
 
Reply With Quote
Old 09-12-2017, 06:30 PM  
nealtw
Contractor retired
 
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 23,048
Liked 2830 Times on 2484 Posts
Likes Given: 4661

Default

That is just board likely shiplap. I would find something else if you really like the angle. You would have lot's of waste out of sheet stock, if you could make it fit at all It would have top be less the 4 ft wide.


nealtw is offline  
 
Reply With Quote
Old 09-15-2017, 06:23 AM  
slownsteady
Administrator
HRT_ADMIN.png
 
slownsteady's Avatar
Join Date: Jun 2009
Location: Newton, NJ
Posts: 6,251
Liked 1095 Times on 905 Posts
Likes Given: 1796

Default

The photo appears to be a small panel. Is the whole house sided that way? You can determine if it is a composite or real wood by probing for grain.
__________________
Learn something every day
---
SnS
slownsteady is offline  
nealtw Likes This 
Reply With Quote
Old 09-15-2017, 06:50 AM  
Sparky617
Member
Join Date: Nov 2014
Location: Cary (Raleigh), NC
Posts: 659
Liked 220 Times on 177 Posts
Likes Given: 136

Default

I'd agree with Neal, it looks like wood shiplap and you can see the knots in parts of it. If that is the only panel with the siding on the 45 I'd probably opt to replace it with something from the cement fiber family and not go on the 45. That was kind of the all the rage back in the late 1970's and 1980's. Not so much anymore.
Sparky617 is offline  
nealtw Likes This 
Reply With Quote
Old 09-16-2017, 08:17 AM  
mabloodhound
Restoration & Renovations
Join Date: Jun 2008
Location: Halifax, MA
Posts: 84
Liked 19 Times on 14 Posts
Likes Given: 18

Default

Yup, that is plain boarding, not T-111. I also agree in using either a fiber cement or PVC product to replace it.

Dave Mason


mabloodhound is offline  
nealtw Likes This 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Wrong furnace installed ktraff HVAC 1 09-08-2011 05:00 PM
Finishing windows before they are installed or after? mattpdx Windows and Doors 4 02-01-2011 10:25 PM
Can carpet be installed with this flooring gap? shawn Flooring 2 10-06-2010 06:31 PM
Foundation footings installed? swindmill Framing and Foundation 11 08-22-2010 08:42 AM
are these windows installed correct??? michelleb Windows and Doors 2 08-20-2010 12:44 PM