mukarakaplan
Member
- Joined
- Jan 22, 2018
- Messages
- 17
- Reaction score
- 5
My whirlpool tub used to work but now it doesn't. I am not sure why. I checked the timer on the wall. It has two red cables connected to it. When I check the cables with voltage tester, they are not hot. They are both neutral. Turning the timer knob doesn't bring these cables any electric. Isn't one of them supposed to be hot?
I checked the main electric panel and every fuse is on without any problems. I also wanted to check the power cable under the tub through the access panel but the white cable box is closed and when I pull its black cable, it doesn't come off since the other end of the box is attached to a metal pipe. So I am not sure how to check if the tub is getting power or not. Any ideas? I've attached some images.
I checked the main electric panel and every fuse is on without any problems. I also wanted to check the power cable under the tub through the access panel but the white cable box is closed and when I pull its black cable, it doesn't come off since the other end of the box is attached to a metal pipe. So I am not sure how to check if the tub is getting power or not. Any ideas? I've attached some images.