gavimobile
Member
- Joined
- Jul 22, 2008
- Messages
- 16
- Reaction score
- 0
ground cable is passing current,
my diagnostics,
i have one of these screwdrivers which lights up from a electrical current. I have an empty fuse open on my fuse box, so i took a new cable (about 2 feet long). positive goes on the top of the fuse and negative goes on the bottom where a strip of metal where all the other negatives are going, ground is not connected on either side just for my test. when i test both sides of ground my screwdriver lights up. i turned off all the other fuses in the house and same thing. is this normal? i am positive both sides of the ground are not in tact with anything.
to prevent me from getting shocked from my refridgerator, i have currently disconnected all grounds till i solve this problem. negative is not showing any current.
brown = positive
blue = negetive
yellow/green = ground
tia
gavimobile
my diagnostics,
i have one of these screwdrivers which lights up from a electrical current. I have an empty fuse open on my fuse box, so i took a new cable (about 2 feet long). positive goes on the top of the fuse and negative goes on the bottom where a strip of metal where all the other negatives are going, ground is not connected on either side just for my test. when i test both sides of ground my screwdriver lights up. i turned off all the other fuses in the house and same thing. is this normal? i am positive both sides of the ground are not in tact with anything.
to prevent me from getting shocked from my refridgerator, i have currently disconnected all grounds till i solve this problem. negative is not showing any current.
brown = positive
blue = negetive
yellow/green = ground
tia
gavimobile