frodo
Senior Member
- Joined
- Aug 5, 2008
- Messages
- 3,067
- Reaction score
- 1,204
working on a project where I want to control 2 water heater elements.
I know what I want to do. but not how to do it.
need your electrical expertise
what i want to do.
to bring a 15 gallon pot of water to boil, with both elements, then regulate temp
with just one
both elements on separate circuits,
first element , full on, just using an on/off switch
the other , I want to control using a simple dimmer type switch.
from off--to full on
Camco 02202/02203 2000W 120V Screw-In Water Heater Element - High Watt Density
I have a drawing, that I do not understand
http://www.amsyrup.com/sloj/images/120vac40a_rev.jpg
I know what I want to do. but not how to do it.
need your electrical expertise
what i want to do.
to bring a 15 gallon pot of water to boil, with both elements, then regulate temp
with just one
both elements on separate circuits,
first element , full on, just using an on/off switch
the other , I want to control using a simple dimmer type switch.
from off--to full on
Camco 02202/02203 2000W 120V Screw-In Water Heater Element - High Watt Density
I have a drawing, that I do not understand
http://www.amsyrup.com/sloj/images/120vac40a_rev.jpg
Last edited: