Hi everyone. I can't seem to find answers I need. So I'm coming here for advice. I had a service call because it wouldn't drain. The tech came out and fixed it. No big deal. We pushed the dishwasher back into it's home. And I started a load of dishes to try it out. My dishwasher counts down as it runs, it had 35 minutes left to wash. I smelled smoke. I opened the dishwasher to see if it was coming from the inside. It wasn't. Smoke was coming from around it. I quickly pulled it out from under the counter and the back of the insulation was on fire. Thankfully I was able to put the fire out. I cut power to the dishwasher. After inspecting what happened, the fire started at the wires at the wall. Not the wiring under the washer. There are no exposed wires, they are properly capped. Now I don't know what to do next. Should I put a cover on the wire box? Since it doesn't have one. Should I put insulation around it? The washer was fine, with no problems up till now. I've had it for years with no fire. Do I just put it back in without insulation? Could we have just pushed it back to far? and that's why it happened? Sorry it's a long story....Any ideas, suggestions, anything would be appreciated. Thanks