J jobeppo Member Joined Jan 16, 2012 Messages 9 Reaction score 1 Jan 11, 2013 #1 Water not going into the washer all of a sudden. Water appears to be coming all the way up to it though..any ideas? Thank you
Water not going into the washer all of a sudden. Water appears to be coming all the way up to it though..any ideas? Thank you
Wuzzat? Well-Known Member Joined Jan 20, 2010 Messages 2,471 Reaction score 176 Jan 11, 2013 #2 Water level switch bad?
J jobeppo Member Joined Jan 16, 2012 Messages 9 Reaction score 1 Jan 11, 2013 #3 Maybe. Since you say that..i would think if it is bad its in the mode..thinking the tubs full if water..stuck open or closed. I did just receive the manual so i can check that too. Thanks
Maybe. Since you say that..i would think if it is bad its in the mode..thinking the tubs full if water..stuck open or closed. I did just receive the manual so i can check that too. Thanks
W woodchuck Well-Known Member Joined Jul 19, 2008 Messages 272 Reaction score 28 Jan 11, 2013 #4 Try on hot and then cold it one works and one doesn't then that water inlet valve is bad.
U user 4883 Well-Known Member Joined Nov 19, 2007 Messages 3,271 Reaction score 399 Jan 12, 2013 #5 remove the hoses and clean the inlet filter/screen on the back of the washer.