frodo
Senior Member
- Joined
- Aug 5, 2008
- Messages
- 3,067
- Reaction score
- 1,204
anyone have an office chair that the darn thing will not stay up ?
the seal is leaking on the piston, its a good chair. but useless because of the piston leak.
get a 4'' long 1/2''bolt
remove the chair from the piston.
just pick it up, they usually slide off with out any tools
drop the bolt down in the hole put it back together
you may want a shorted bolt, i like the 4''
the seal is leaking on the piston, its a good chair. but useless because of the piston leak.
get a 4'' long 1/2''bolt
remove the chair from the piston.
just pick it up, they usually slide off with out any tools
drop the bolt down in the hole put it back together
you may want a shorted bolt, i like the 4''